Sigma Notation: How the Summation Symbol (Σ) Works

Sigma notation is a compact way to write a long sum using the capital Greek letter Σ. Instead of writing 1 + 2 + 3 + … + 100, you write one short expression. Then the symbol tells you exactly which terms to add.

It also goes by the name summation notation. You will meet it in algebra, calculus and almost every statistics formula. This guide explains each part, then works through examples step by step.

What Sigma Notation Means

Sigma notation means “add up every term produced by this rule.” The big Σ is the instruction to sum. Below and above it sit the starting and ending values of a counter, called the index.

For example, Σi=15 i means: let i run from 1 to 5, then add the results. So it equals 1 + 2 + 3 + 4 + 5 = 15. The symbol itself is the capital sigma (Σ), the 18th letter of the Greek alphabet.

Quick fact: Σ stands for “sum” because sigma matches the Latin S. Leonhard Euler is usually credited with introducing Σ for sums around 1755.

The Parts of a Summation

Every sum written in sigma notation has four parts. Once you can name them, you can read any sum. The table below uses Σi=1n ai as the model.

PartWhere it sitsWhat it does
Σ (sigma)CenterTells you to add the terms
Index (i)Below Σ, left of the equals signCounts through whole-number steps
Lower limit (1)Below Σ, right of the equals signFirst value of the index
Upper limit (n)Above ΣLast value of the index
Term (ai)Right of ΣRule that turns each index value into a number

The index is a “dummy” variable, so its letter does not matter. OpenStax Calculus Volume 1 notes that i, j, k, m and n are the usual choices. In addition, the index always moves up by 1 at each step.

How to Evaluate a Sum, Step by Step

Evaluating a sum follows the same routine every time. Work slowly at first, and write each term out.

  1. Read the lower limit and set the index to that value.
  2. Substitute the index into the term to get the first number.
  3. Increase the index by 1 and substitute again.
  4. Repeat until the index reaches the upper limit.
  5. Add all the numbers you wrote down.

A quick check helps, too. The number of terms equals the upper limit minus the lower limit, plus 1. So a sum from i = 3 to i = 7 has 7 − 3 + 1 = 5 terms.

Sigma Notation Examples

The examples below start simple and build up. Each answer has been checked term by term.

Example 1: A Sum of Squares

Find Σi=14 i². First, substitute each index value: 1², 2², 3², 4². That gives 1 + 4 + 9 + 16, so the sum is 30.

Example 2: A Linear Term

Find Σk=14 (2k + 1). Here the index is k, but the method is the same.

The terms are 3, 5, 7 and 9. Therefore, the sum is 3 + 5 + 7 + 9 = 24.

Example 3: Starting at Zero

Find Σi=04 2i. The lower limit is 0, so the first term is 2⁰ = 1.

Next come 2, 4, 8 and 16. Adding them gives 1 + 2 + 4 + 8 + 16 = 31.

Example 4: A Constant Term

Find Σi=16 4. The term never changes, so you add 4 six times. As a result, the sum is 6 × 4 = 24.

Example 5: Adding Data Values

Suppose five test scores are x₁ = 4, x₂ = 8, x₃ = 6, x₄ = 5 and x₅ = 7. Then Σi=15 xi = 4 + 8 + 6 + 5 + 7 = 30.

Dividing by 5 gives a mean of 6. This is exactly how statistics uses Σ.

Summation Rules and Shortcut Formulas

Long sums would be slow to add by hand. Fortunately, a few rules let you split and simplify them. These properties hold for any constant c.

  • Constant rule: Σi=1n c = nc
  • Constant multiple: Σi=1n c·ai = c · Σi=1n ai
  • Sum rule: Σi=1n (ai + bi) = Σi=1n ai + Σi=1n bi
  • Difference rule: the same split works with a minus sign.

Three closed formulas then handle powers of the index. They replace hundreds of additions with one calculation.

SumFormulaCheck with n = 4
Σi=1n in(n + 1) / 24 × 5 / 2 = 10
Σi=1n i²n(n + 1)(2n + 1) / 64 × 5 × 9 / 6 = 30
Σi=1n i³[n(n + 1) / 2]²10² = 100

Example 6: Using a Formula

Find Σi=1100 i. Using the first formula, 100 × 101 / 2 = 5,050. Similarly, Σi=110 i² = 10 × 11 × 21 / 6 = 385.

Example 7: Combining the Rules

Find Σi=120 (3i − 2). First, split it into 3 · Σi minus Σ2. Next, Σi from 1 to 20 is 20 × 21 / 2 = 210, so the first part is 630.

Then Σ2 over 20 terms is 40. Finally, 630 − 40 = 590.

Where the Summation Symbol Appears

Statistics uses Σ in nearly every formula. For instance, the mean is Σx / n.

Similarly, the variance (σ²) and the standard deviation (σ) both add up squared deviations. Our guide to statistics symbols shows how Σ fits with μ, σ and other letters.

Calculus uses sigma notation for Riemann sums, which approximate the area under a curve. Series in algebra and finance also rely on it. You can practice more problems in Paul’s Online Notes from Lamar University.

A close cousin is capital pi (Π), which multiplies terms instead of adding them. For other operators and symbols, browse our hub on Greek letters in math.

How to Type the Summation Symbol

In LaTeX, write \sum_{i=1}^{n} a_i to get a properly sized sum with limits. The plain letter command \Sigma gives Σ, but it does not place limits above and below. So use \sum for math.

Elsewhere, Unicode has two characters. The n-ary summation sign ∑ is U+2211, while the Greek letter Σ is U+03A3. On a US Mac keyboard, Option+W types ∑, the summation sign.

On Windows, Alt+228 types Σ from code page 437. For every method, see the LaTeX Greek letter list.

Tip: In Word, type 2211 and press Alt+X to get ∑. Inside Word’s equation editor, typing \sum and a space builds a sum with limit boxes.

Common Mix-Ups

Students mix these signs up often, especially when they type them rather than write them.

  • Σ vs ∑: Σ (U+03A3) is the Greek letter, while ∑ (U+2211) is the summation operator. Math software and LaTeX’s \sum use the operator.
  • Σ vs Π: capital sigma adds terms, while capital pi (Π) multiplies them.
  • Σ vs ∫: Σ adds separate terms one by one, while the integral sign adds up a continuous quantity.
  • Σ vs E: a capital sigma is not a stylized E. It always reads as “sum” in math and as “s” in Greek.

Frequently Asked Questions

What does sigma notation mean?

Sigma notation is shorthand for adding a sequence of terms. The Σ means “sum,” and the numbers below and above it give the first and last values of the index.

How do you read Σ with i = 1 to n?

Read it as “the sum from i equals 1 to n of” the term. You substitute each whole number from 1 to n and add the results.

What is the sum of i from 1 to 100?

It equals 5,050. Use the formula n(n + 1) / 2 with n = 100, which gives 100 × 101 / 2.

Can the index start at 0?

Yes. The lower limit can be any whole number, including 0 or a negative number. Just start your substitution at that value.

What is the difference between Σ and ∑?

Σ (U+03A3) is the Greek capital letter sigma. ∑ (U+2211) is the math summation operator, which fonts often draw larger. Use ∑ for math typesetting when you can.

Similar Posts